iPhone Speaker Cleaner Works in Safari

iPhone Speaker Cleaner

Is your iPhone speaker quiet or muffled after rain, a swim or months in a dusty pocket? This free iPhone speaker cleaner plays a cleaning sound straight from Safari. Water mode uses a low 165 Hz tone to push water out, and Dust mode uses fast pulses to shake loose dust and lint. No app or shortcut needed.

Silent mode must be off. On iPhone, a silent phone plays no sound in Safari.
Water + Dusttwo cleaning modes
60 secone water run
All iPhonesin Safari, no app
1:00Ready
Cleaning mode

Step by step

How to Use the iPhone Speaker Cleaner in Safari

You do not need to install anything to play the iPhone speaker cleaner sound. Open this page in Safari and follow these four steps.

Step 1

Turn off silent mode

Flip the Ring/Silent switch or press the Action button so the bell is not crossed out.

Most missed step
Step 2

Volume all the way up

Press the volume up button until the bar is full. Take off a thick case if you can.

100% volume
Step 3

Choose a mode and start

Pick Water after rain or a splash, or Dust for a phone that sounds dull over time.

Water or Dust
Step 4

Speaker facing down

Hold the iPhone with the bottom speaker facing the floor until the timer ends.

60 or 40 seconds
Works in Safari and ChromeNo app neededNo shortcut needed
Two cleaning modes

iPhone Speaker Cleaning Sound: Water vs Dust

Water and dust block the speaker in different ways, so each mode uses a different iPhone speaker cleaning sound. Pick the one that matches what happened to your phone. Water mode uses the same 165 Hz tone as water eject.

Water mode

165 Hz · 60 seconds
Use afterRain, a splash, a spill, the pool or the shower.
The soundA steady low hum with a second tone on top.
How it worksBig speaker movement pushes drops out of the grille.
You will noticeSound gets louder and less buzzy as water leaves.
VS

Dust mode

pulsing · 40 seconds
Use afterMonths in a pocket, a bag or a dusty place.
The soundFast rhythmic pulses that switch between two tones.
How it worksQuick stops and starts shake loose dust and lint.
You will noticeVoices and music sound clearer and less dull.

Not sure which one you need? Run Water mode first, then Dust mode.

Muffled sound

Fix a Muffled iPhone Speaker

A muffled iPhone speaker is not always about water or dust. Go through these checks before you book a repair. Our guide on iPhone speaker not working has more fixes.

Start cleaning

Check the case and screen protector

A tight case or a badly placed screen protector can cover the speaker or the earpiece. Take them off and test again.

Takes 10 seconds

Clean the grille gently

Use a soft, dry brush to lift dust and lint from the speaker holes. Never push pins or needles into the grille.

Soft brush only

Run the cleaner twice

Run Water mode, then Dust mode, with the speaker facing down. Wait a minute and run them again if needed.

Water, then Dust

Check where the sound goes

If AirPods or a Bluetooth speaker are connected, sound may go there. Turn Bluetooth off and test the speaker again.

Bluetooth off

Restart and update

A restart and the latest iOS update can fix sound bugs. If nothing helps, contact Apple Support.

Last step
Compatibility

Supported iPhone Models

The iPhone speaker cleaner works on every iPhone that can open a website in Safari. Here are the most common models. After cleaning, check the result with the speaker test.

2025iPhone 17 series

iPhone 17, 17 Pro, 17 Pro Max and iPhone Air.

Works in Safari
2024 to 2025iPhone 16 series

iPhone 16, 16 Plus, 16 Pro, 16 Pro Max and 16e.

Works in Safari
2023iPhone 15 series

iPhone 15, 15 Plus, 15 Pro and 15 Pro Max.

Works in Safari
2022iPhone 14 series

iPhone 14, 14 Plus, 14 Pro and 14 Pro Max.

Works in Safari
2020 to 2021iPhone 13 and 12

All models, including the mini versions.

Works in Safari
2018 to 2019iPhone 11, XS and XR

All models, including Pro and Max.

Works in Safari
2020 to 2022iPhone SE

Second and third generation.

Works in Safari
OlderiPhone X and 8

And older models with an up to date Safari.

Works in Safari

Searched for an i phone speaker cleaner? You are in the right place, and iPads work too. Use the same steps and hold the iPad with its speakers facing down.

Questions

FAQs

Quick answers about cleaning iPhone speakers.

Still muffled?

Run Water mode, then Dust mode, and check that silent mode is off and Bluetooth is not connected.

Go to the tool

Take off the case and screen protector, then gently brush the speaker grille with a soft, dry brush. Turn off silent mode, raise the volume and run Water mode and then Dust mode on this page with the speaker facing down. Also check that Bluetooth is not sending the sound to another device, and restart your iPhone. If it is still muffled, contact Apple Support.

Use a clean, soft and dry brush, such as a new soft toothbrush, and brush the speaker holes gently. Then run Dust mode on this page so the pulses shake loose what the brush could not reach. Do not use pins, needles, liquids or strong compressed air.

Clean both the bottom speaker and the earpiece at the top of the screen with a soft, dry brush. Then run the iPhone speaker cleaner in Water or Dust mode. During calls, also make sure the call volume is up and that your case does not cover the earpiece.

An Apple Store or Apple Authorized Service Provider can check your speaker and tell you if it needs cleaning or repair. You can book a visit in the Apple Support app. Try the free steps on this page first, as they fix most muffled speakers.

The water eject shortcut is not an Apple feature. It is made by users and shared online for the Shortcuts app. You do not need it, because this page plays the same kind of sound in Safari. If you still add a shortcut, only use one from a source you trust.

Speaker tools

Other Tools

Every tool runs in your browser on iPhone, Android and desktop. No app, no sign up.

Phone Speaker CleanerThe main cleaner: water and dust modes in one 60-second cycle. Fix My SpeakerThree short steps: a water tone, a dust tone and a test tone. Water EjectA 165 Hz tone with Normal and Strong modes to push water out. Speaker TestLeft, right and stereo checks plus a 20 Hz to 20 kHz sweep. Call Speaker CleanerClear dust and moisture from the earpiece so callers sound clear. Speaker Cleaner FrequencyPlay any tone from 20 Hz to 20000 Hz, with one-tap presets. Headphone TestCheck left and right, run a bass sweep and test the full 20 Hz to 20 kHz range. Phone Vibration TestTap once to make your phone buzz and check if the vibration motor is weak or noisy. Mic TestSee your live mic level, record 5 seconds and play it back to hear yourself.
Ready when you are

Make your iPhone speaker sound clear again.

Silent mode off, volume up, speaker facing down. Pick Water or Dust and press Start.

Start cleaning Water · Dust · works in Safari